arfink Posted June 6, 2012 Posted June 6, 2012 Thanks to your helpful input and suggestions I have begun work on concept art for the various things I will be making for sale on my laser cutter/engraver. Here is a first taste of some of my work: [img]https://lh5.googleusercontent.com/--zuL4pvcZGk/T8-LWIJRQvI/AAAAAAAAB_E/hkQmagvTEtg/s800/keychain%2520concepts.png[/img] These keychain concept drawings would, if executed, be done in acrylic plastic. Right now for the bunny (since he is the logo for my business, BunnyBox Design) I am favoring a transparent orange, for the sacred heart a two-tone glossy red and orange, and for the Phatmass I could do them in a wide variety of colore.
arfink Posted June 6, 2012 Author Posted June 6, 2012 [quote name='arfink' timestamp='1339001830' post='2441795'] in a wide variety of colore. [/quote] I just now realized I lapsed into fake Spanish there.
arfink Posted June 6, 2012 Author Posted June 6, 2012 Another concept: [img]https://lh6.googleusercontent.com/-i_hxegFYmhk/T8_NQ183KXI/AAAAAAAAB_Y/XGoexA0mvio/s800/bunny%2520blaster.png[/img] This concept has been roughly tested using paper mockups and will probably only require 3 or 4 laser-cut pieces to assemble. Assembly would likely be with a simple cyanoacrylate glue with perhaps mounting tabs of some sort.
arfink Posted June 7, 2012 Author Posted June 7, 2012 How you like this? [img]https://lh6.googleusercontent.com/-25jQlwcaz5I/T9C_cOndUJI/AAAAAAAACAA/40MdV0gIDZk/s640/pendant.png[/img]
Anomaly Posted June 7, 2012 Posted June 7, 2012 [quote name='arfink' timestamp='1339018756' post='2441914'] Another concept: [img]https://lh6.googleusercontent.com/-i_hxegFYmhk/T8_NQ183KXI/AAAAAAAAB_Y/XGoexA0mvio/s800/bunny%2520blaster.png[/img] This concept has been roughly tested using paper mockups and will probably only require 3 or 4 laser-cut pieces to assemble. Assembly would likely be with a simple cyanoacrylate glue with perhaps mounting tabs of some sort. [/quote]Not to be a Donald Downer, but what about product liability when someone shoots their freind in the eye, uses too strong of a band and it breaks sending debris in their own eye, modifies to shoot bands with staples or paperclips attached, etc., etc. etc. I suggest you avoid toys and moving parts for a start-up. Go to a couple of craft/arts shows and see what's there. Don't tell them you are thinking of competing, but you can ask what sells/doesn't sell, etc. for products you like or are similar to what you want to produce. Of course, you'll get lots of new ideas as well.
arfink Posted June 7, 2012 Author Posted June 7, 2012 [quote name='Anomaly' timestamp='1339082540' post='2442176'] Not to be a Donald Downer, but what about product liability when someone shoots their freind in the eye, uses too strong of a band and it breaks sending debris in their own eye, modifies to shoot bands with staples or paperclips attached, etc., etc. etc. I suggest you avoid toys and moving parts for a start-up. Go to a couple of craft/arts shows and see what's there. Don't tell them you are thinking of competing, but you can ask what sells/doesn't sell, etc. for products you like or are similar to what you want to produce. Of course, you'll get lots of new ideas as well. [/quote] Maybe use a disclaimer? I understand people in the US love to sue, but if people are going to be shooting each other in the eyes they deserve it. But seriously, keep in mind this is entirely just concept work and I suspect you may misunderstand my reason for sharing this. These do not necessarily represent what my initial product lineup will be, but rather a random assortment of the various ideas I have had so far. I have in fact been to a number of various artsy/trade-show things and have spent a decent amount of time asking what sells and doesn't. I will continue to do so whenever I get the opportunity. Finally, at best this will be a cottage-industry kind of thing for the near future. People selling rubber band guns on Etsy would fall into the same category as what I'd be doing, I suspect. Thanks for the input though, it's good to hear from people concerned for my success. I'll keep your words in mind.
sixpence Posted June 7, 2012 Posted June 7, 2012 [quote name='arfink' timestamp='1339018756' post='2441914'] Another concept: [img]https://lh6.googleusercontent.com/-i_hxegFYmhk/T8_NQ183KXI/AAAAAAAAB_Y/XGoexA0mvio/s800/bunny%2520blaster.png[/img] This concept has been roughly tested using paper mockups and will probably only require 3 or 4 laser-cut pieces to assemble. Assembly would likely be with a simple cyanoacrylate glue with perhaps mounting tabs of some sort. [/quote] I want this! :D ...I mean..they sell mega-serious slingshots to kids and bee-bee guns...this doesn't sound to dangerous
arfink Posted June 8, 2012 Author Posted June 8, 2012 OK pholks, I am still drawing my own concepts for the time being, but is there anything you would like to see me design?
MIKolbe Posted June 8, 2012 Posted June 8, 2012 what kind is it??? it is like a vinyl label laser cutter, or like a co2 laser???
eagle_eye222001 Posted June 8, 2012 Posted June 8, 2012 As long as it's 'Wabbit season' and not Eagle season...
EmilyAnn Posted June 8, 2012 Posted June 8, 2012 [quote name='arfink' timestamp='1339173848' post='2442558'] OK pholks, I am still drawing my own concepts for the time being, but is there anything you would like to see me design? [/quote] How about keyrings of mlkolbe, like your drawings of him in the Phatmass Quest thread?
arfink Posted June 9, 2012 Author Posted June 9, 2012 [quote name='MIkolbe' timestamp='1339175244' post='2442565'] what kind is it??? it is like a vinyl label laser cutter, or like a co2 laser??? [/quote] CO2 baby. The good kind.
arfink Posted June 9, 2012 Author Posted June 9, 2012 [img]https://lh3.googleusercontent.com/-Q0MvCKEZKe8/T9Lh0aA7uuI/AAAAAAAACAU/BQwF7sjm9j8/s800/one%2520shot%2520rubber%2520band%2520gun%2520sample.png[/img] Sixpence: how does this one look? Modelled off an actual Colt Woodsman. Sorta. This one is only one shot, but I have been having difficulty getting a 6-shot things working properly.
arfink Posted June 9, 2012 Author Posted June 9, 2012 Keychain? [img]https://lh5.googleusercontent.com/-J6c3WqrM2uw/T9LpHhFQ71I/AAAAAAAACAo/M9tmB3-f5w4/s800/phatmass%2520keychain%2520sample.png[/img]
arfink Posted June 11, 2012 Author Posted June 11, 2012 [quote name='Anomaly' timestamp='1339082540' post='2442176'] Not to be a Donald Downer, but what about product liability when someone shoots their freind in the eye, uses too strong of a band and it breaks sending debris in their own eye, modifies to shoot bands with staples or paperclips attached, etc., etc. etc. [/quote] I'd like to just say I took my latest shooter design and built it with 1/4" plywood on the scroll saw, just to see if my idea would work. It does indeed shoot rubber bands just fine, though it's quite ugly due to my complete lack of skill with a scroll saw. The laser-cut ones will be indeed be much much nicer. [img]https://lh3.googleusercontent.com/-iXnbxWyc_7c/T9VPs60iWbI/AAAAAAAACA8/fR2UgQh5h-4/s800/IMG_2626.JPG[/img] I shot myself and then (after determining the rubber bands were seriously weaksauce) shot others with it. You likely couldn't put out an eye with the bands it shoots (#16 rubber bands) but you could put out an eye by just poking someone with it. This is assuming they sat still long enough for you to put the barrel in their eye. Also, the design inherently precludes the usage of clips or staples because of the way it retains the band. I tried it.
arfink Posted June 11, 2012 Author Posted June 11, 2012 [quote name='Anomaly' timestamp='1339379827' post='2443305'] Is that a challenge? [/quote] IDGI
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now