reelguy227 Posted September 3, 2007 Posted September 3, 2007 (edited) I come seeking advice from the pham, the tech side of the pham that is. If you know your stuff when it comes to computers, could you please help me with this hard drive dilemma. Bear with me please, it's a long post. I just bought and installed a Raptor, and put all my info from my old HDD onto it. I've been using, and everything's been pretty fine. But all of the sudden I've been getting these weird random lock ups that have never happened before. I'll be surfing the net and listening to itunes at the same time, when the pc will just lock up and the music will stop and all I'll hear is this sound like an alarm going off(like the music is stuck). After a second or two, everything goes back to normal. Could this mean I have a faulty Raptor in any way shape or form? Also, in Event Viewer, I get this error message at the time of the glitch:"The device /Device/scsi/Jraid1/, did not respond within the timeout period." What does that mean? I have no raid configurations, so I have no idea why Event Viewer said that. What should I do? The problem doesn't happen very often, but it is nonetheless annoying. Any and all advice is greatly appreciated. I have the Raptor set to IDE in the bios. I didn't download my motherboard's raid driver, but didn't think I needed to, because I'm not using a raid setup. Here's my system: GIGABYTE GA-P35C-DS3R LGA 775 Intel P35 ATX Motherboard/Intel Core 2 Duo E6600 @ Stock/ ATI Radeon x1900XT 512 mb/3 GB DDR2 Crucial Ballistix PC2 6400 @ 4-4-4-12/SATA 250 GB 7200 RPM Western Digital Caviar SE/Silencer 470 PC Power and Cooling PSU. Thanks in advance for any help. Edited September 3, 2007 by reelguy227
Groo the Wanderer Posted September 3, 2007 Posted September 3, 2007 I think I see your problem: You said you have it set to IDE in the BIOS, but your stats show the Raptor is a SATA drive. The mobo may b have translation issues. Try going back into the BIOS and selecting either SATA ir SCSI as the hard drive type. Also check the size of your power supply. These days, you should be running at least 500w.
reelguy227 Posted September 3, 2007 Author Posted September 3, 2007 (edited) I'm running a pc power and cooling silencer 470. You think those thirty watts would make much of a difference? You don't think it's the Raptor itself do you? I ran WD diagnostics and passmark on it, and the drive passed both tests with no errors. I also did a checkdisk on it just to make sure, and it passed that. I'll check in the bios and get back to you, but thanks for the help so far. Edited September 3, 2007 by reelguy227
Theologian in Training Posted September 4, 2007 Posted September 4, 2007 (edited) [quote name='reelguy227' post='1376978' date='Sep 3 2007, 02:30 PM']I'm running a pc power and cooling silencer 470. You think those thirty watts would make much of a difference? You don't think it's the Raptor itself do you? I ran WD diagnostics and passmark on it, and the drive passed both tests with no errors. I also did a checkdisk on it just to make sure, and it passed that. I'll check in the bios and get back to you, but thanks for the help so far.[/quote] No, what he is saying is that your drive is not IDE but SATA (Serial). You need to change the settings to reflect that in the BIOS. The error message is because Serial drives can be RAIDed and though you are only using one drive it still reads it as a RAID drive. Also, when I installed my SATA drives (Caviar) I had to use a floppy for the RAID drivers, which it still needed even though I was not RAIDing them, check the instructions and see if it says anything about that. I think they have since done away with that, but I am not 100% sure. With regard to power, you should be OK with 470. And, given that the Raptor is such a fast drive and has a tendency of overheating itself if you are not careful, keep an eye on temps and make sure it is running as cool as you can get it. Hope that helps Edited September 4, 2007 by Theologian in Training
Jaime Posted September 4, 2007 Posted September 4, 2007 Have you hit "control+alt+delete"? (that's the only thing I hear from my IT dept)
reelguy227 Posted September 4, 2007 Author Posted September 4, 2007 [quote name='Theologian in Training' post='1377570' date='Sep 4 2007, 02:22 AM']No, what he is saying is that your drive is not IDE but SATA (Serial). You need to change the settings to reflect that in the BIOS. The error message is because Serial drives can be RAIDed and though you are only using one drive it still reads it as a RAID drive. Also, when I installed my SATA drives (Caviar) I had to use a floppy for the RAID drivers, which it still needed even though I was not RAIDing them, check the instructions and see if it says anything about that. I think they have since done away with that, but I am not 100% sure. With regard to power, you should be OK with 470. And, given that the Raptor is such a fast drive and has a tendency of overheating itself if you are not careful, keep an eye on temps and make sure it is running as cool as you can get it. Hope that helps[/quote] Thanks! So I should set it to raid in the bios, even though I'm not running a raid setup? I guess I'll have to download the raid drive then, or something. I don't think it's overheating, but I'll check. What's optimal temperature? The drive is behind the front intake fan, which is 120 mm. Any more advice would be great.
Groo the Wanderer Posted September 4, 2007 Posted September 4, 2007 nonono set it to SATA or Serial or SCSI (whichever you have)...not RAID Your hard drive placement is perfect. It should run below 60C or thereabouts.
reelguy227 Posted September 4, 2007 Author Posted September 4, 2007 Can you go to this link and look at my mobos manual, and maybe see what I should change in the bios? It would help me a lot, my current hard drive mode settings haven't changed anything. Here's the link: [url="http://www.gigabyte.com.tw/Support/Motherboard/Manual_Model.aspx?ProductID=2551"]http://www.gigabyte.com.tw/Support/Motherb...?ProductID=2551[/url] It's a pdf file. Thanks so far.
Mateo el Feo Posted September 4, 2007 Posted September 4, 2007 [quote name='Groo the Wanderer' post='1377814' date='Sep 4 2007, 02:52 PM']nonono set it to SATA or Serial or SCSI (whichever you have)...not RAID[/quote]I'm pretty sure that Raptors are only SATA. I don't think anyone has a SCSI drive who doesn't know it, since they cost so much.
Theologian in Training Posted September 5, 2007 Posted September 5, 2007 [quote name='Groo the Wanderer' post='1377814' date='Sep 4 2007, 02:52 PM']nonono set it to SATA or Serial or SCSI (whichever you have)...not RAID Your hard drive placement is perfect. It should run below 60C or thereabouts.[/quote] Right, sorry I was not that clear. You should set the setting to SATA. Temps should be fine given the location of the Harddrive.
MIKolbe Posted September 5, 2007 Posted September 5, 2007 (edited) C:\format just kidding. Edited September 5, 2007 by MIkolbe
reelguy227 Posted September 5, 2007 Author Posted September 5, 2007 If you guys could take a look at my mobo manual link, and read the part in the bios section on integrated peripherals, and what mode I should set the drive to, that would be great! Keep the advice coming, I really want to figure out if this is mobo/software related, or the drive itself. Which I'm hoping it's not, because I just rma'd 3 gb of ram to newegg last week because of a number of bsods. Ugh....why can't I just get a product that works! If anyone think's it's the drive itself, let me know, because I have till Sept 21 to take it back. Thanks again so far.
Groo the Wanderer Posted September 5, 2007 Posted September 5, 2007 *drool* 8 SATA connections....12 USB ports....6 RAM slots in dual channel no less....onboard gigalan...7.1 audio.... SATA RAID/AHCI Mode (Intel ICH9R Southbridge) Enables or disables RAID for the SATA controllers integrated in the Intel ICH9R Southbridge. Disabled Configures the SATA controllers to PATA mode. (Default) [b]AHCI Configures the SATA controllers to AHCI mode[/b]. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. For more information about AHCI, please visit Intel's website. RAID Enables RAID for the SATA controllers. SATA Port0-3 Native Mode (Intel ICH9R Southbridge) Specifies the operating mode of the integrated SATA controllers. Disabled Allows the SATA controllers to operate in Legacy IDE mode. In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with other device. Set this option to Disabled if you wish to install operating systems that do not support Native mode, e.g. Windows 9X/ME. (Default) [b]Enabled Allows the SATA controllers to operate in Native IDE mode[/b]. Enable Native IDE mode if you wish to install operating systems that support Native mode, e.g. Windows XP/2000. Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip) Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA 2 chip. IDE Configures the SATA controller to PATA mode. (Default) [b]AHCI Configures the SATA controller to AHCI mode[/b]. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. For more information about AHCI, please visit Intel's website. RAID/IDE Enables RAID for the SATA controller. (The IDE controller still operates in PATA mode) Use the modes I bolded above if possible - they give you the best performance with SATA in non-RAID configs....provided Windoze cooperates. If it won't boot to Windows after making these settings, change them back, one at a time until they do.
reelguy227 Posted September 6, 2007 Author Posted September 6, 2007 Hey......we're not geeks, we're computer geeks. And it's probably more than you know. haha
reelguy227 Posted September 6, 2007 Author Posted September 6, 2007 (edited) [quote name='Groo the Wanderer' post='1378637' date='Sep 5 2007, 01:42 PM']*drool* 8 SATA connections....12 USB ports....6 RAM slots in dual channel no less....onboard gigalan...7.1 audio.... SATA RAID/AHCI Mode (Intel ICH9R Southbridge) Enables or disables RAID for the SATA controllers integrated in the Intel ICH9R Southbridge. Disabled Configures the SATA controllers to PATA mode. (Default) [b]AHCI Configures the SATA controllers to AHCI mode[/b]. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. For more information about AHCI, please visit Intel's website. RAID Enables RAID for the SATA controllers. SATA Port0-3 Native Mode (Intel ICH9R Southbridge) Specifies the operating mode of the integrated SATA controllers. Disabled Allows the SATA controllers to operate in Legacy IDE mode. In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with other device. Set this option to Disabled if you wish to install operating systems that do not support Native mode, e.g. Windows 9X/ME. (Default) [b]Enabled Allows the SATA controllers to operate in Native IDE mode[/b]. Enable Native IDE mode if you wish to install operating systems that support Native mode, e.g. Windows XP/2000. Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip) Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA 2 chip. IDE Configures the SATA controller to PATA mode. (Default) [b]AHCI Configures the SATA controller to AHCI mode[/b]. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. For more information about AHCI, please visit Intel's website. RAID/IDE Enables RAID for the SATA controller. (The IDE controller still operates in PATA mode) Use the modes I bolded above if possible - they give you the best performance with SATA in non-RAID configs....provided Windoze cooperates. If it won't boot to Windows after making these settings, change them back, one at a time until they do.[/quote] Thanks for the advice, will try and get back to you. You think setting the bios to those will fix my prob? Edited September 6, 2007 by reelguy227
Groo the Wanderer Posted September 11, 2007 Posted September 11, 2007 hey mano. Did this work out for ya?
reelguy227 Posted September 12, 2007 Author Posted September 12, 2007 No, I had to change the settings back to where they were because the computer wouldn't boot because of the changes. But thanks anyways, anything else you can think of?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now