Jump to content
Join our Facebook Group ×
An Old School Catholic Message Board

Recommended Posts

Posted

I pulled the trigger folks! The guys at the laser cutter company are putting it in the mail for me as I write this. SO EXCITED

Posted

[img]http://fslaser.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/img_2107_final_3.jpg[/img]

It's so pretty.

Posted (edited)

woot!

Edited by Slappo
xTrishaxLynnx
Posted

Nice! Looks like fun, not that I'd have any clue how to use it! But I am sure you will make some pretty rad stuff with it :]

Posted

It's actually a bit like using a regular printer, except you use it to cut the outlines of things instead of printing them. For engraving it basically handles just like a printer does, except you can change the heat of the laser to make it engrave deeper or shallow, and to make it "burn" more or less.

xTrishaxLynnx
Posted

Ohhh, nice!!!

Posted

How do you cut a laser?

Posted

i am arseuming you can control the power outputs???

if so, you can laser etch some cool glass stuff!

Posted

Does it have a laser turret defense mode you can switch it to? In case aliens should invade...

Posted (edited)

[quote name='MIkolbe' timestamp='1340736618' post='2449130']
i am arseuming you can control the power outputs???

if so, you can laser etch some cool glass stuff!
[/quote]

Yes, you can control the power output, either with software PWM (short, high intensity pulses, makes for a finer engraving job on plastics) or by actually dialling down the power supply directly. I am not sure which would be better for glarse. I'll just have to try it out.

beaver damIT WHO PUT GLASS IN THE FILTER!

Edited by arfink
Posted

My settings for gl[i]a[/i]ss lean on the high power and high speed.... also, get a single page of newspaper and put it on the glarse, and wet it with a spray bottle... it will look cleaner... and surprisingly, the cheaper the gl[i]as[/i]s (in composition), the better..the more lead the glass has, the more it will hold the heat of the laser and will produce coarser results.


You should also be able to have fun with anondized stuff like all get out... get your settings right and you can take off the anondized color, leaving the silver base metal...

Before a run, we get a sample and cover the imprint area with masking tape and color the tape with a sharpie... then we run it super light to make sure we got the positioning right....

you might want to invest in something like a pegboard with pegs and keep a log of set ups... or simply buy acrylic and burn templates...

acrylic stinks BAD...BAD...like open all your windows and turn the fans on..BAD...


have fun, dude!

IcePrincessKRS
Posted

[quote name='arfink' timestamp='1340739744' post='2449141']
beaver damIT WHO PUT GLASS IN THE FILTER!
[/quote]

No one. For some reason, I don't know why, the filter is going crazy today. I looked and nothing new has been added, but it's still wigging out. Watch.

cool
razzle dazzleer
razzle dazzleest
razzle dazzleing
razzle dazzleish
razzle dazzleed

ass
PhatMarse
glass
pass
Mass
grass
harsele
tarsele

Posted

my meeting with dUSt WAS fruitful, then..

:evil:

TheresaThoma
Posted

YAY FINK!! I can't wait to see what you do with this!

brianthephysicist
Posted

[img]http://gifsforum.com/images/gif/clap%20clap%20clap/grand/star_trek_clap_clap_gif.gif[/img]

CONGRATULATIONS!!!!


Just curious, what kind of laser is it? CO2 perchance? Also, what's the maximum intensity?

Posted

[quote name='brianthephysicist' timestamp='1340754489' post='2449241']
[img]http://gifsforum.com/images/gif/clap%20clap%20clap/grand/star_trek_clap_clap_gif.gif[/img]

CONGRATULATIONS!!!!


Just curious, what kind of laser is it? CO2 perchance? Also, what's the maximum intensity?
[/quote]

CO2. I do not know max intensity though. I'll have to look that one up, or maybe conduct a test once it arrives.

[quote name='MIkolbe' timestamp='1340740181' post='2449144']
My settings for gl[i]a[/i]ss lean on the high power and high speed.... also, get a single page of newspaper and put it on the glarse, and wet it with a spray bottle... it will look cleaner... and surprisingly, the cheaper the gl[i]as[/i]s (in composition), the better..the more lead the glass has, the more it will hold the heat of the laser and will produce coarser results.


You should also be able to have fun with anondized stuff like all get out... get your settings right and you can take off the anondized color, leaving the silver base metal...

Before a run, we get a sample and cover the imprint area with masking tape and color the tape with a sharpie... then we run it super light to make sure we got the positioning right....

you might want to invest in something like a pegboard with pegs and keep a log of set ups... or simply buy acrylic and burn templates...

acrylic stinks BAD...BAD...like open all your windows and turn the fans on..BAD...


have fun, dude!
[/quote]

Thanks for the tips! As for alignment, I will have a very nice fancy inline visible alignment laser at my disposal, something which even some of the super expensive American-made machines do not have.

Posted

[quote name='IcePrincessKRS' timestamp='1340742378' post='2449165']
ass
[/quote]
:shock:

Posted (edited)

Don't sarse me boy.

Edited by arfink

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...