MIKolbe Posted June 29, 2012 Posted June 29, 2012 [quote name='arfink' timestamp='1340762481' post='2449300'] Thanks for the tips! As for alignment, I will have a very nice fancy inline visible alignment laser at my disposal, something which even some of the super expensive American-made machines do not have. [/quote] Explain this alighment thingie, do dad.. If you are marking a dogtag, it will be able to find X and Y center (on the dogtag), so you mark will be centered automatically? What is you put 30 or so tag up at a time, it can figure all that out? ( i mean, we use corel, dockers, positioning (or something) and step and repeat the logos, so no issues there) but it can *find* center by itself?
arfink Posted June 29, 2012 Author Posted June 29, 2012 (edited) [quote name='MIkolbe' timestamp='1340969307' post='2450335'] Explain this alighment thingie, do dad.. If you are marking a dogtag, it will be able to find X and Y center (on the dogtag), so you mark will be centered automatically? What is you put 30 or so tag up at a time, it can figure all that out? ( i mean, we use corel, dockers, positioning (or something) and step and repeat the logos, so no issues there) but it can *find* center by itself? [/quote] Oh well, it doesn't automatically center on your piece. For that you'll need a set of calipers. However, the alignment dot isn't just some gew-gaw they stick on the side of the cut head, like with some of the Epilog lasers. It actually travels the same beam path with the mirrors and everything, so it's in *exactly* the same spot as the cut beam. To do alignment you can use the calipers and measure everything out, but what's easier is to just have the program do a quick outline trace with the visual dot on (and the IR cutting beam off) and just eyeball it. I understand that for marking on pieces that you aren't also cutting can be a huge pain, and this tool honestly doesn't help too much with that. You still would need to get out yon calipers and check everything. But for my envisioned use, I'll be engraving and cutting one after the other without moving the work pieces, and so alignment in those cases is not very critical unless you plan on having the parts shift of their own accord during the cut. EDIT: If I was going to mark a large number of dogtags, here is how I would do it: Since my laser can both cut and mark, I would cover the honeycomb table with a sheet of thin balsa wood, and tape it to the table so it cannot move around. I would then cut outlines of all the tags into the sheet, and remove the pieces. Then I would have little dog-tag-shaped holes in known positions and could just slap the tags into the "mold" and mark them, and do that over and over again. Edited June 29, 2012 by arfink
MIKolbe Posted June 29, 2012 Posted June 29, 2012 never heard of using balsa wood... but, hey, if it works for ya!
havok579257 Posted June 29, 2012 Posted June 29, 2012 [quote name='arfink' timestamp='1340725094' post='2449054'] [img]http://fslaser.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/img_2107_final_3.jpg[/img] It's so pretty. [/quote] i'm confused. where do the crytals go for this machine so you can go back to 1985 and win state?
arfink Posted June 29, 2012 Author Posted June 29, 2012 [quote name='MIkolbe' timestamp='1340989543' post='2450408'] never heard of using balsa wood... but, hey, if it works for ya! [/quote] Well, the balsa is cheaper than any plastic. I suppose one could use thick card...
MIKolbe Posted June 29, 2012 Posted June 29, 2012 I might be worried about starting a fire in my new, $3000 laser.
Slappo Posted June 29, 2012 Posted June 29, 2012 (edited) [quote name='MIkolbe' timestamp='1340994717' post='2450445'] I might be worried about starting a fire in my new, $3000 laser. [/quote] Can't take the fire? Don't start the heat! I know it goes something like that... Edited June 29, 2012 by Slappo
brianthephysicist Posted June 30, 2012 Posted June 30, 2012 [quote name='Slappo' timestamp='1341000935' post='2450487'] Can't take the fire? Don't start the heat! I know it goes something like that... [/quote] I thought it was if you can't stand the heat stay out of the kitchen.
Vincent Vega Posted June 30, 2012 Posted June 30, 2012 It's if you can't afford the kitchen, don't buy the wife. Am I the only native English speaker?
arfink Posted June 30, 2012 Author Posted June 30, 2012 [quote name='MIkolbe' timestamp='1340994717' post='2450445'] I might be worried about starting a fire in my new, $3000 laser. [/quote] Cutting wood is perfectly safe as long as you don't set the laser power too low and subsequently move it very slowly.
arfink Posted July 1, 2012 Author Posted July 1, 2012 Well, laser arrives tomorrow. Today I'm going to cobble together a portable workbench to set it up on, probably out of an old vanity or some scrap countertop and 2x4s. I also shall need to obtain: - a 5 gallon bucket for the water reservoir - 5 gallons of distilled water (grocery store) - a small kitchen fire extinguisher (safety first!) - some locking castors (so I can move the laser stand around easily) - a dryer vent Looks like I'll be going to the hardware store today.
arfink Posted July 2, 2012 Author Posted July 2, 2012 The laser has arrived! I spent the better part of today getting things ready to set it up. I still don't have proper ventilation yet, but we'll deal with that tomorrow. Pics will come soonish.
arfink Posted July 3, 2012 Author Posted July 3, 2012 Well, I successfully burned some holes in some paper and made a line in a piece of 1/4" pine board. I didn't get further than tonight because my ventilation still isn't hooked up quite right and it was getting stinky. Also I discovered that the y axis end stops are in need of adjustment, the red-dot alignment tool requires assembly, and the table needs to be made level. Also I should probably update the power vectoring config files so that it compensates for the fact that the x axis is actually slower than the y, resulting in noticeably uneven marking on paper.
brianthephysicist Posted July 3, 2012 Posted July 3, 2012 Would a vibration isolation table also be a good idea? Or do you think it won't be sensitive to those tiny vibrations? You could also damp vibrations by placing your current table's legs onto thick pieces of rubber. [img]http://www.autom8.com/images_product/table_20series.jpg[/img]
Ed Normile Posted July 3, 2012 Posted July 3, 2012 (edited) I justs seen this and could not help but wonder, is this machine for a possible business venture or is it for a hobby? It looks similiar to the machines they cut self stick vinyl letters out for magnetic signs and ones that stick directly to vehicle doors. Another thing as its hard to tell from the picture, how big is that thing? Any way have fun and do not get too busy on sunday cutting glass and pass on mass, that would show no class, not meaning to be crass. EDIT : durn, they fixed the fiddler! ed Edited July 3, 2012 by Ed Normile
Amppax Posted July 3, 2012 Posted July 3, 2012 [quote name='USAirwaysIHS' timestamp='1341015219' post='2450629'] It's if you can't afford the kitchen, don't buy the wife. Am I the only native English speaker? [/quote] When buying wife from Soviet Russia, English not needed.
arfink Posted July 3, 2012 Author Posted July 3, 2012 Well, I got it for both reasons Ed. As for vibration dampening, that's not an issue. The resolution is only 1000DPI, so any slight vibrations won't be a big deal. In fact, I get more vibration from the air compressor on this thing than I do from the movement of the cutting head. Levelling the table took about 10 seconds once I figured out how to do it, which took a lot longer.
arfink Posted July 3, 2012 Author Posted July 3, 2012 As for size- it's much bigger than the pictures make it look. It supposedly could fit on a desk, but if you did that it'd probably consume all the desk space you had. I'll try to get some video and a size comparison shot some time today after I figure out this darn dryer vent thing.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now