Jump to content
Join our Facebook Group ×
An Old School Catholic Message Board

Recommended Posts

ConfusedCatholicGuy
Posted

[quote name='arfink' timestamp='1345344327' post='2469960']
Haha, I love what you do with it!

I'm glad it arrived safe and sound.

I'll have more stuff coming up folks! I got plastics in stock now, and I'm going to begin experimenting with them in the coming week. Also I have begun construction of my web store, from which you may order swag once it is completed.

As for special orders and commissions and stuff, I'm always open to that kind of stuff. Just PM me!
[/quote]
Or just go over to your house, in my case!

Posted (edited)

Reading about geo-caching was a very intersesting experience, USAirwaysIHS.

[quote name='USAirwaysIHS' timestamp='1345333802' post='2469874']
(orange and blue, of course - God's favorite colors)
[/quote]

I take it that is a sport reference local to the USA?

Edited by Innocent
Vincent Vega
Posted

[quote name='Innocent' timestamp='1345348192' post='2470004']
Reading about geo-caching was a very intersesting experience, USAirwaysIHS.
[/quote]
:like:
[quote]
I take it that is a sport reference local to the USA?
[/quote]
Yes. They're the school colors of my alma mater.

Posted

Got an ambitious new design to try out on the laser:

[img]https://lh6.googleusercontent.com/-GLBNOC5NLr0/UDGi37_lcbI/AAAAAAAAC3Q/foJjSp-sUWg/s800/Screenshot%2520from%25202012-08-19%252016%253A55%253A36.png[/img]

This one has multiple engraving depths across multiple paths which are mixed with close cuts. Should be interesting one way or another. I'm hoping it works.

Roamin Catholic
Posted

[quote name='USAirwaysIHS' timestamp='1345333802' post='2469874'] (orange and blue, of course - God's favorite colors)
[/quote]

Keep the orange, get rid of the blue....(I wish our SEC college days would have overlapped, would've been fun)

MissScripture
Posted

[quote name='Roamin_Catholic' timestamp='1345430769' post='2470416']


Keep the orange, get rid of the blue....(I wish our SEC college days would have overlapped, would've been fun)
[/quote]
Orange and blue were the colors where you went to grad school.

Roamin Catholic
Posted

[quote name='MissScripture' timestamp='1345430880' post='2470419']
Orange and blue were the colors where you went to grad school.
[/quote]

Indeed, but I have more loyalty to where I went to undergrad.

xTrishaxLynnx
Posted

[quote name='arfink' timestamp='1345430349' post='2470412']
Got an ambitious new design to try out on the laser:

[img]https://lh6.googleusercontent.com/-GLBNOC5NLr0/UDGi37_lcbI/AAAAAAAAC3Q/foJjSp-sUWg/s800/Screenshot%2520from%25202012-08-19%252016%253A55%253A36.png[/img]

This one has multiple engraving depths across multiple paths which are mixed with close cuts. Should be interesting one way or another. I'm hoping it works.
[/quote]

Will you be making one like you showed me before, without the bursts around the outside? I'd like to see one like that as well. Even if you didn't do it on plastic...

Posted

[quote name='xTrishaxLynnx' timestamp='1345431945' post='2470430']
Will you be making one like you showed me before, without the bursts around the outside? I'd like to see one like that as well. Even if you didn't do it on plastic...
[/quote]

I can certainly do both. And if you like it a lot I'd be happy to send you one too. :)

franciscanheart
Posted

[quote name='USAirwaysIHS' timestamp='1345333802' post='2469874']
[img]http://oi47.tinypic.com/2le6i55.jpg[/img]

For some background on why I had arfink make this: I am a casual geocacher (google it, it's pretty razzle dazzle) and wanted a personalized (and cheap) bauble to leave behind. I had him make this so that it could be stamped into clay (orange and blue, of course - God's favorite colors) which had been inlayed in a cap of one of my bottled beverages of choice (pictured is the top to a bottle of Angry Orchard - if you're a cider fan, I recommend it)[i]. [/i]It incorporates my "callsign" and its meaning. Above is a sample outcome. Looks pretty good methinks.
[/quote]
That's amesome, UAIHS. Love geocaching, and love that bauble.

Posted

So I did some more experiments with multi-pass engraving. This time instead of doing multiple passes with the same design, I engraved down one layer, then changed the pattern and engraved deeper in different places. The effect is very razzle dazzle looking in wood. Next I will try in acrylic.

[img]https://lh4.googleusercontent.com/-YiDKRobvSOA/UDK4atNrZrI/AAAAAAAAC5I/rZ_csacHHis/s800/IMG_2943.JPG[/img]

Posted

I did one in some pale blue transparent acrylic. The photos cannot do it justice, or at the very least I'm not a very skilled camera operator. The plastic holds details extremely well, and the laser produces extremely crisp lines and cuts with flame polished edges. Looking through the side of the piece is like looking into an icy kaleidoscope. It's amazing.

[img]https://lh3.googleusercontent.com/-RcEH7UnZuew/UDLF8BNchxI/AAAAAAAAC6A/9SCvSYVwD6Y/s800/IMG_2946.JPG[/img]

Posted (edited)

How do you make the machine understand the depth to which you want it to burn?

[quote name='arfink' timestamp='1345505382' post='2470904']
I did one in some pale blue transparent acrylic. The photos cannot do it justice, or at the very least I'm not a very skilled camera operator.
[/quote]

Since the piece is transparent/translucent, try taking a photograph with the object illuminated by backlighting. Maybe it will bring out the features better?

Edited by Innocent
Posted

The wood one looks very burnt to me? It might be the shading and the lighting, but when making so many passes over wood to cut so deep are you noticing that it's charring the wood a little more?

Posted

Arfink, I'm assuming you could make a small necklace? if so, I may have to be PMing you shortly.

Posted

[quote name='Slappo' timestamp='1345508212' post='2470939']
The wood one looks very burnt to me? It might be the shading and the lighting, but when making so many passes over wood to cut so deep are you noticing that it's charring the wood a little more?
[/quote]

Yes, exactly. 1/4" is kinda pushing the boundaries of what the machine can effectively cut through, and so the edges get darker. They clean up OK, but in that picture I didn't clean the wood at all.

The engraved face, however, has no discoloration due to heat. The interior of the wood piece I was using had that color naturally.

As for setting the depth of cut, that's one thing that's very difficult to do exactly. The amount of beam power required to go to a certain depth is highly dependent on the material being cut, since variations in melting and combustion temperature, the amount of gases produced when cutting, and whether there is smoke to obscure the beam, will all play a role.

Posted

[quote name='Amppax' timestamp='1345508347' post='2470941']
Arfink, I'm assuming you could make a small necklace? if so, I may have to be PMing you shortly.
[/quote]

Absolutely. Hit me up bro. :)

Posted

so razzle dazzle! might get something from u in sept ..after i start getting paid again :P

Posted

Here's the latest to come off the laser. This is one I'd be comfortable selling, and will be part of my initial lineup when my web store opens in 2 weeks.

[img]https://lh6.googleusercontent.com/-wlje_trj3EQ/UDV2WoFuYkI/AAAAAAAAC7c/UZHMXvl5V64/s800/mta%2520pendant.JPG[/img]

This is made from 1/8" basswood (it's becoming a favorite material) and is 1 3/4" across. It's meant as a pendant, but could be used as a keychain if a more sturdy material such as acrylic were used. The edges look darker than they really are, because they are in shadow. The piece is quite light in color, with only one tiny spot of visible varnish near the loop. It has not been cleaned yet, but I imagine these could look even better with a dark stain.

Maximilianus
Posted

coo[font=arial,helvetica,sans-serif]l[/font]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...